The following is a list of potential problems
that we can isolate:
2- Loose Lugs to Wires
3- Loose Lugs to Panel Buss
4- Loose Breaker to Panel Buss
5- Defective Breakers
6- Loose Fuse Socket to Panel Buss
7- Overloaded Circuits
8- Phase Unbalance
9- Defective Wires
We are adamantly convinced with each Electrical Infrared Scan we perform that it is a MUST in Preventative Maintenance. The risk of electrical failures and fires are greatly minimized by isolating potential problems. We have found deficiencies in every electrical scan and some were even considered emergencies.
The major deficiency found is high resistance. This resistance creates heat that is imaged and recorded with our scanner by converting the infrared radiation into an electrical video signal. The temperatures are also recorded at the same time. High resistance is usually the result of poor contact between connection contact surfaces or loose connections. Whether the scanning is performed for preventative maintenance or acceptance of newly installed equipment, you will know the condition of your equipment.